Clean Agent Cylinders

Description

The LF 91200-E 1200 lb. cylinder is filled with one pound increments from a minimum of 519 lb. to a maximum of 1211 lb., to meet the exact amount of agent required. The quantity of agent required for each enclosure can be calculated through LIFECO software, which contains a sophisticated calculation routine for predicting the two-phase as well as two-component flow of agent and nitrogen through the distribution piping network in quasi-steady state from the initiation of the discharge to final gas blow down. The cylinder is then super-pressurized with dry nitrogen to 360 psi at 70 ° F to provide extinguishment in 10 seconds or less. The 4’’ stainless steel valve offers excellent flow characteristics for the liquefied gas, allows for long pipe runs and has a greater coverage area. This is the largest Clean Agent cylinder currently manufactured and designed for very large applications.

All the Clear Agent cylinders are manufactured, tested and stamped in accordance with DOT 4BW500 or DOT 4BA500. All cylinders are equipped with a back pressure type valve. A piston in the valve bore is equipped with a rubber seal that keeps the HFC-227ea Clean Agent under pressure within the cylinder. A small hole in the piston allows cylinder pressure to equalize on both sides of the piston. Since the area at the top of the piston is greater than the area at the bottom of the piston, the net force seals the piston against the valve discharge outlet. When the cylinder pressure on the top of the piston is relieved by means of automatic or manual activation, there is only cylinder pressure acting against the piston seal, and the piston slide to its full open position, allowing cylinder discharge through the distribution piping network.

  • 35 lb. HFC-227ea Clean Agent Cylinder – LF90035-E
  • 70 lb. HFC-227ea Clean Agent Cylinder – LF90070-E
  • 150 lb. HFC-227ea Clean Agent Cylinder – LF90150-E
  • 250 lb. HFC-227ea Clean Agent Cylinder – LF90250-E
  • 375 lb. HFC-227ea Clean Agent Cylinder – LF90375-E
  • 560 lb. HFC-227ea Clean Agent Cylinder – LF90560-E
  • 1200 lb. HFC-227ea Clean Agent Cylinder – LF91200-E