X500 Series
Protect You home, your assets and your loved ones
Intelligent Addressable Fire Alarm Control Panel
Dual Loop Card Model
A HVAC system supplies conditioned air to virtually every part of a building. Any smoke introduced into this air duct
system is thus spread to the entire building.
Network & Communication card
The LF-NC5004 is multiple communication protocols such a USB, Ethernet, Can Bus, RS485/RS232 on a single card
intended to use in LF-X500 series control and indicating equipment.
CanBus to Single-Mode
LF-MC201 allows you to extend CAN bus communication at distances up to 20 km depending on the type of optical
fiber.
Conventional Reflective Beam Detector
LF-X5130 Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for real user
friendly alignment method.
Intelligent Smoke Detector
The LF-X5100 Intelligent Addressable Optical Smoke Detector is the ideal device for most applications, due to its spiffing
linear response to a wide variety of different types of smoke patterns.
Intelligent Heat Detector
The LF-X5110 Intelligent Fixed and Rate of Rise Heat Detector is reliable for application in places where may have high
dust level or smoky environments, making a normal smoke detector undesirable.
Intelligent Multi-sensor Fire Detector
The LF-X5120 Intelligent Multi-sensor Fire Detector is the ideal device for most applications, due to its spiffing linear
response to a wide variety of different types of smoke patterns and combining with heat sensing sensor for temperature
response
Addressable Sounder Base
Addressable Detectors Base
A “Detector Base” in the context of fire detectors is a component that serves as the mounting and connection point for a fire detector device.
Addressable Sounder Strobe Base
Addressable Sounder Strobe Base is an alarm warning device used to notify persons in the vicinity of the
occurrence fire emergency in order the person to take appropriate measures.
Base Mount Short Circuit Isolator
In the event of short
circuit on the detection loop the LF-X5232 Isolators either side of the loop will detect the problem and open circuit and
isolates the faulty part of the loop, enabling other devices on the unaffected part of the loop to operate normally.
Addressable Sounder Strobe
Addressable Sounder
Addressable Sounder is alarm warning device used to notify persons in the vicinity of the occurrence fire
emergency in order the person to take appropriate measures
Addressable Sounder Strobe Model
The LF-X5301 Intelligent Sounder Strobe is alarm warning device used to notify persons in the vicinity of the
occurrence fire emergency in order the person to take appropriate measures.
Addressable Single IO Module
The LF-X5210 Addressable Single Input/output Module is characterized as one input or output volt free relay and
control module
Loop Isolator
Addressable Dual I O Module
The LF-X5220 Addressable Dual Input/output Module is characterized as two inputs or outputs volt free relay and control
module.
Addressable Zone Monitor Unit
Addressable Zone Monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system.
Addressable Sounder Circuit Module
Addressable Sounder Circuit Module unit is an addressable interface module, which will integrate conventional sounder or bell to addressable system.
12 In 2 Out Module
The LF-X5223 Addressable 12 Input/ 2output Module is characterized as 12 inputs power limited and 2 outputs volt free relay.
Backbox Model
The LF-X5990 is used for all LF-X52 series of addressable modules to provide surface mount installation. This box back has a two knock holes for cable entrance
Graphic Monitoring Software
LF-X500 panel design a new set of software engineering monitoring system, through good architecture designed to meet various requirements of stand-alone monitoring system, network and other aspects of the system, the system is easy to operate, the interface is beautiful and generous.
LCD Repeater Panel
LF-X5330 LCD Repeater Panel is designed with built-in MCU processor to display exact fire event messages from the
control panel and fast relay response with simultaneous audible and visual signal output
Intelligent Graphic Mimic Panel
LF-X5331 Intelligent Graphic Repeater Panel is designed with built-in MCU processor and it can fast relay response with simultaneous audible and visual signal output.
Handheld Programmer
The LF-X5932 is the general purpose programming tool use for LF-X family products.
Duct Probe
A HVAC system supplies conditioned air to virtually every part of a building. Any smoke introduced into this air duct system is thus spread to the entire building.
Backbox Model
Backbox compatible for LF-X5140. Contracted using high quality plastic. No electrical circuit. Easy to install.
USB Dongle Model
Service Company feature is available in all the LF-X500 series of control panel, the LF-5814 encrypted USB is used to
enable this service.
Remote Indicator
remote indicator is an attractive device used
in installations where a detector going to alarm is likely to occur behind a locked door, inaccessible rooms, or in a ceiling void to provide indication of the activation of a fire detector.
Intelligent PSU
Intelligent PSU is to solve the problem of power supply and development of field equipment, power output is about 265W（DC26.5V/5A or 10A）.
LCD Repeater Panel
The White Eagle MCP50 is a manual call point designed to work in conventional fire alarm systems.
Intelligent PSU
Intelligent PSU is to solve the problem of power supply and development of field equipment, power output is
about 265W（DC26.5V/5A or 10A）.
Back
